Supplying your Inside/Outside Back Covers or Inside Front Covers: supplying digital files
Approval
If you are supplying digital artwork to us for printing, a full size colour proof (including corner trim positions) with full text must be approved by our Publishing Department prior to production of the digital cromalin.
No changes should be made to agreed copy without the agreement of our Publishing Department.
Screen angles
Yellow 0° or 90°, Magenta 45°, Cyan 15° or 105°, Black 75°.
Duo tones should be angled to avoid screen clash.
Under colour removal
Minimum 20% in Yellow, Magenta and Cyan. Maximum 220%.
Ads containing large, heavy, dark areas, e.g. night time photographs, may require a higher level of UCR. If you think this may apply, please contact our Publishing Department on 0118 959 2111 for advice before colour separation.
Reversed-out type matter should be produced with the dominant colour for shape and size with the under colours spread, to reduce problems with register during printing. Type matter or detail smaller than 10pt should be reversed-out of one colour only. Fine lettering and thin rules in one colour only.
Shiners
A 40% tint of cyan should be laid under all large areas of solid black whenever there are no under colours. The tint should be cut back from all white-out areas and reversed-out type.
File format/images/fonts
Files can be accepted on CD or disk.
Send copies of files not originals.
Label all CDs or disks with the advertiser's name, type of advertisement and identity of the directory in which the ad is to appear.
Please supply all files in recognised page layout application format (e.g. QuarkXpress
/Pagemaker).
The preferred file format is PDF. Alternative file formats are Postscript and EPS.
All files must be complete, fully-assembled pages with high resolution graphics in place. All fonts and images should be embedded.
Pages should be assembled as single pages and should be consistent in dimensions and margins.
A minimum bleed margin of 5mm is required on work that prints to the edge of the page.
Each file (page) must be 100% of the final book size.
All files including any placed graphics must have a unique name.
Create image backgrounds of white instead of none.
Do not use pre-defined hairline rules, they should be defined to no less than 0.25pt.
Do not include trapping within the file.
Hi-resolution images should be supplied in TIFF, EPS, JPEG or CT format, with only lossless compression used.
All images must be in CMYK format (and Pantone ® if required) not RGB.
Do not send FPO (for position only) images.
All screen and printer fonts, including those embedded in EPS files, must be supplied.
All fonts should be Adobe Type 1. Do not use TrueType fonts.
Proof specification
The following should be supplied with the CD/disk.
A high resolution digital proof of each page (i.e. digital cromalin), output to Euro Standard tolerances (SWOP). This must be produced from the CD/disk supplied. We cannot accept responsibility if changes have been made to the ad data supplied after the proof has been produced.
A hard copy printout of the contents of each CD or disk supplied.
The digital proofs must have a full colour bar and density information available to scan.
Density readings: Cyan 1.4, Magenta 1.3, Yellow 0.9, Black 1.65
Dot Gain: Measures in the fine 50% tone area in the Euro Standard control strip.
Cyan & Black 24%, Magenta 22%, Yellow 20% all at +/- 2%
Sequence:
Cyan, Magenta, Yellow, Black.
Digital proofs must be 100% size. Each proof should carry individual identification.
Screen rulings
175 lpi (lines per inch)